Kilns Wheels & Equipment
Grid
List
1-4 Kiln Prop Connector
1/4' Prop Connector
Tubes of refractory material 1.75” (38mm) diameter, which can be added by the addtion of Interlocking Extension Props to increase the height as required.
Inter-connectors are extension props with two “male” sides for safely joining two heavy duty tubular props in a stack.
£2.16 inc VAT
Castellated Props
Castellated Prop
Turreted props 1.75” in diameter, which interlock to form a very stable propping system to increase the height. Can also be used with tubular props with care.
from £1.98 inc VAT
Heavy Duty Prop Base
Heavy Duty Prop Base
May be used at the top and base of columns of tubular props at the junction with kiln shelves to spread the load. Especially useful with heavy loads.
£8.04 inc VAT
Heavy Duty Tubular Props
Heavy Duty Tubular Props
Used to support kiln shelves, three props are normally used to support each shelf to give stable support, though larger square or rectangular shelves may be suited to four props.
Diameter: 4.5cm
from £1.80 inc VAT
Kiln Prop Extensions
Kiln Prop Extensions
Can be used individually or together to form stable columns or in conjunction with the heavy duty tubular props to increase the height. Prop extensions have one 'male' and one 'femail' sides for safely joining two tubular props in a stack.
from £2.40 inc VAT
Light Duty Tubular Props
Light Duty Tubular Props
Used to support kiln shelves, three props are normally used to support each shelf to give stable support, though larger square or rectangular shelves may be suited to four props.
Diameter: 2.5cm
from £1.32 inc VAT
24cm x 32cm x 1.5cm Rectangular Kiln Shelf
Made from cordierite, these shelves can withstand temperatures up to 1300 degrees C.
The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees...
£24.00 inc VAT
25.5cm x 35.5cm x 1.5cm Rectangular Kiln Shelf
Made from cordierite, these shelves can withstand temperatures up to 1300 degrees C.
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed...
£24.07 inc VAT
29cm x 29cm x 1.5cm Square Kiln Shelf
Made from cordierite, these shelves can withstand temperatures up to 1300 degrees C.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in cracking or sudden fragmentation.
£18.00 inc VAT
30cm x 43cm x 2cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£30.31 inc VAT
43cm x 30.5cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£37.67 inc VAT
43cm x 36.8cm x 2cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£53.39 inc VAT
43cm x 43cm x 2.5cm Square Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£53.39 inc VAT
43cm x 51cm x 2.5cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£67.20 inc VAT
45.7cm x 30.5cm x 1.75cm Rectangular Kiln Shelf
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in cracking or sudden fragmentation.
£55.20 inc VAT
45.7cm x 53.3cm x 2.4cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£68.40 inc VAT
53.3cm x 26.7cm x 2.5cm Rectangular Kiln Shelf
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in...
£60.00 inc VAT
61cm x 61cm x 2cm Square Kiln Shelf
Kiln Shelf For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may...
£74.78 inc VAT
Circular Kiln Shelves
Circular Kiln Shelves
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separated and dried slowing over several hours. Do not exceed 1100 degrees C until completely dry. Rapid heating of wet kiln...
from £9.60 inc VAT
Semi Circular Kiln Shelves
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separated and dried slowing over several hours. Do not exceed 1100 degrees C until completely dry. Rapid heating of wet kiln furniture may result...
from £7.34 inc VAT
Kilncare IKON V46 Kiln
Introducing the IKON. Built in the heart of The Potteries, the IKON has Ceramics running through its veins. The IKON has unbeatable performance, reliability and heritage and that is what makes it the PREMIUM kiln. Ultra-efficient with an average 1280°C stoneware firing using only 18 units of electricity. 1315°C maximum temperature.
13Amp Plug In Supply
The IKON V46 comes with a standard...
from £3,381.39 inc VAT
Kilncare IKON V61 GXR Kiln
Introducing the IKON. Built in the heart of The Potteries, the IKON has Ceramics running through its veins. The IKON has unbeatable performance, reliability and heritage and that is what makes it the PREMIUM kiln. Ultra-efficient with an average 1280°C stoneware firing using only 18 units of electricity. 1300°C maximum temperature.
13Amp Plug In Supply
The IKON V61GXR comes with a standard...
from £4,001.91 inc VAT
Rohde Ecotop 145S
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency. Suitable for temperatures to 1320°C.
2 - Layer Insulation Concept
Including super-efficient thermal bricks and 15 mm microporous insulating board.
Reversible...
from £4,727.18 inc VAT
Rohde Ecotop 20S Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency.
13Amp Plug In Supply
The Ecotop 20 comes with a standard 13A plug and lead, allowing for you to simply plug it into the wall and get firing without having to worry about getting the...
from £2,337.85 inc VAT
Rohde Ecotop 43 Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency.
13Amp Plug In Supply
The Ecotop 43 comes with a standard 13A plug and lead, allowing for you to simply plug it into the wall and get firing without having to worry about getting the...
from £2,883.68 inc VAT
Rohde Ecotop 60 Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency.
13Amp Plug In Supply
The Ecotop 60 comes with a standard 13A plug and lead, allowing for you to simply plug it into the wall and get firing without having to worry about getting the...
from £3,244.15 inc VAT
Rohde Ecotop 60S Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency. Suitable for temperatures to 1320°C.
2 - Layer Insulation Concept
Including super-efficient thermal bricks and 15 mm microporous insulating board.
Reversible...
from £3,357.43 inc VAT
Rohde Ecotop 80S Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency. Suitable for temperatures to 1320°C.
2 - Layer Insulation Concept
Including super-efficient thermal bricks and 15 mm microporous insulating board.
Reversible...
from £3,645.80 inc VAT
Rohde Ecotop 95S Kiln
The Rohde Ecotop kilns have new internal designs. They are currently one of the most economical kilns on the market and feature new and unique insulations concept that allows for very high energy efficiency. Suitable for temperatures to 1320°C.
2 - Layer Insulation Concept
Including super-efficient thermal bricks and 15 mm microporous insulating board.
Reversible...
from £4,016.57 inc VAT
Rohde Front Loader KE-B Series(1280C)
The KE-B series comprises Frontloaders with 3-side heating and a kiln volume of 35 to 210 litres. You can choose between the compact tabletop models KE-35B and KE-65B as well a four floor models KE-105B to KE-210B.
Frontloaders from the KE-B series are particularly suitable for use in public institutions, such as schools and therapy centres. These electrically operated kilns offer best possible...
Rohde Front Loader KE-N Series (1300C)
Rohde Frontloaders form the KE-N series comprise of six models with kiln volumes between 100 and 480 litres. The heating elements are recessed into grooved firebricks on all five wall sides.
The KE-N series has been designed for use in workshops and schools. The heating elements in this series have been recessed into grooved bricks. This results in a variety of advantages. The heating elements...
Rohde Front Loader KE-S Series (1320C)
The Rohde KE-S kiln series consists of nine modes with kiln sizes between 100 and 1000 litres in a classic construction with heating elements mounted on support rods.
5 sided heating provides for an even heat distribution in every range of performance.
This KE-S kiln series has been designed for hard and long lasting application in professional workshops but is also suitable for daily use in...
Rohde Front Loader KE-S+ Series(1350C)
Rohde Frontloaders from the KE-S+ series comprises of six models with kiln volumes between 100 and 480 litres. The heating elements are mounted on support rods. 5-side heating provides even distribution of heat throughout every performance range.
The KE-S+ series was designed for demanding applications and use over many years in professional workshops. The 3-layer microporous insulation structure...
Rohde Front Loader KE-SH Series (1400C)
Rohde Frontloaders from the KE-SH Series comprises of six models with kiln volumes between 100 and 480 litres. The heating elements are mounted on support rods. 5-side heating provides even distribution of heat throughout every performance range.
The KE-SH series was designed for demanding applications and use over many years in professional workshops. The highly durable heating elements and...
Rohde Front Loading Gas Kiln KG Series
Gas-fired Frontloaders from the KG series comprise serval models with kiln volumes between 250 and 1000 litres. These kilns were designed for use in workshops. Based on electric frontloaders, the entire steel construction is equipped with in-frame ventilation made of stainless steel sheets. The R-SiC ceiling support “System ROHDE” prevents crakcs and particles falling from the ceiling...
from £11,620.80 inc VAT
Rohde Front Loading Raku Kiln KR Series
This kiln series combines high-level raku technology with all the advantages of a frontloader. The V2A stainless steel jacket and side wall structure made of lightweight firebricks guarantee extreme sturdiness and a long service life. The material used in the kiln door and back is free of ceramic fibre, thus reducing weight. Thanks to a remarkably handy construction, the kiln door opens easy and...
from £2,878.00 inc VAT
Rohde Top Loader TE100MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £3,907.00 inc VAT
Rohde Top Loader TE100S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £4,387.00 inc VAT
Rohde Top Loader TE110MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £4,111.00 inc VAT
Rohde Top Loader TE130MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £4,171.00 inc VAT
Rohde Top Loader TE130S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £4,819.00 inc VAT
Rohde Top Loader TE145S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £5,251.00 inc VAT
Rohde Top Loader TE150MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £4,531.00 inc VAT
Rohde Top Loader TE165S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £5,323.00 inc VAT
Rohde Top Loader TE190MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £4,913.00 inc VAT
Rohde Top Loader TE200MCC+
The solid ROHDE Toploaders from the MCC+ series can be used for a variety of applications ranging from glass processing at 800°C to manufacture of stoneware at 1280°C. Toploaders from this series are particularly suitable for use in public institutions such as schools and kindergartens, as well as for both artists and hobbyists. The wide temperature range allows maximum flexibility when it...
from £4,939.00 inc VAT
Rohde Top Loader TE200S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £5,513.00 inc VAT
Rohde Top Loader TE250S
The TE-S series of top loading kilns are high quality kilns for every day applications in professional ceramic workshops who are regularly firing to high temperatures. They combine state-of-the-art technology with high durability. The ROHDE TE-S series of kilns are designed to be expandable in size, so you can start with a smaller model and then grow to a larger size later. Designed to be deconstructed...
from £5,993.00 inc VAT