Kiln Furniture
Grid
List
1-4 Kiln Prop Connector
1/4' Prop Connector
Tubes of refractory material 1.75” (38mm) diameter, which can be added by the addtion of Interlocking Extension Props to increase the height as required.
Inter-connectors are extension props with two “male” sides for safely joining two heavy duty tubular props in a stack.
£2.16 inc VAT
Castellated Props
Castellated Prop
Turreted props 1.75” in diameter, which interlock to form a very stable propping system to increase the height. Can also be used with tubular props with care.
from £1.98 inc VAT
Heavy Duty Prop Base & Collar
Can be used at the top and base of columns of tubular props at the junction with kiln shelves to spread the load. Especially useful with heavy loads.
Collar is 75mm diameter and will raise your prop by approximately 11mm. These cordierite collars fit any of our shelf props that have a 45mm diameter.
Maximum firing temperature: 1300°C
£8.04 inc VAT
Heavy Duty Tubular Props
Heavy Duty Tubular Props
Used to support kiln shelves, three props are normally used to support each shelf to give stable support, though larger square or rectangular shelves may be suited to four props.
Diameter: 4.5cm
from £1.80 inc VAT
Kiln Prop Extensions
Kiln Prop Extensions
Can be used individually or together to form stable columns or in conjunction with the heavy duty tubular props to increase the height. Prop extensions have one 'male' and one 'femail' sides for safely joining two tubular props in a stack.
To fit props with a cylinder diameter of 45mm and wall thickness of 8mm.
Max. firing temperature: 1300°C
from £2.40 inc VAT
Light Duty Tubular Props
Light Duty Tubular Props
Used to support kiln shelves, three props are normally used to support each shelf to give stable support, though larger square or rectangular shelves may be suited to four props.
Diameter: 2.5cm
from £1.32 inc VAT
Circular Kiln Shelves - Cordierite
Kiln shelves made from high-quality cordierite.
Maximum firing temperature: 1300°C
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separated and dried slowing over several hours. Do not...
from £9.60 inc VAT
Circular Kiln Shelves - Silicon Carbide
Nitride Silicon bonded SiC Shelves
1.Thickness 7mm, lighter, easy to handle and lift in and out of the kiln with less stress to your hands and back.
2.Thin thickness but higher strength, allow for significantly more stacking space when compared to conventional 1.6cm and 2.5cm thick cordierite kiln shelves.
3.Quicker heating up,save energy by 30%, reduce the production cost
4.Longer...
from £40.00 inc VAT
Rectangular Kiln Shelves - Cordierite
Made from cordierite, these shelves can withstand temperatures up to 1300 degrees C.
For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed...
from £24.00 inc VAT
Semi Circular Kiln Shelves - Cordierite
Kiln shelves made from high-quality cordierite.
Maximum firing temperature: 1300°C
The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm.
* Please note all new batts should be separated and dried slowing over several hours. Do not exceed 1100...
from £7.34 inc VAT
Square Kiln Shelves - Cordierite
Made from cordierite, these shelves can withstand temperatures up to 1300 degrees C.
* Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in cracking or sudden fragmentation.
from £18.00 inc VAT