Raku Brush On Glazes

Fired up to 1000°C, cool to 750°C, remove from kiln. Put in combustable such as sawdust. Allow to cool. Wash in water to encourage crazing Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

Fired up to 1000°C, cool to 750°C, remove from kiln. Put in combustable such as sawdust. Allow to cool. Wash in water to encourage crazing Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

Fired up to 1000°C, cool to 750°C, remove from kiln. Put ion combustable such as sawdust. Allow to cool. Wash in water to encourage crazing Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

Fired up to 1000°C, cool to 750°C, remove from kiln. Put ion combustable such as sawdust. Allow to cool. Wash in water to encourage crazing Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

Fired up to 1000°C, cool to 750°C, remove from kiln. Put in combustable such as sawdust. Allow to cool. Wash in water to encourage crazing Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

Fired up to 1000°C, cool to 750°C, remove from kiln. Put in combustable such as sawdust. Allow to cool. Wash in water to encourage crazing. Raku Firing Tips Raku glazes should be fired up to 1000°C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750°C. While still red hot they should be transferred as quickly as possible into a reduction bin...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...

This is a metallic brush-on glaze for use in the Raku firing technique, using an electric or gas kiln. This glaze is the correct consistency for brush-on application, where 2-3 coats are required, but if thinned slightly with water it will work for pouring or dipping. This glaze matures at 950°c. The attached sample should only be used as a colour guide, as there are so many factors that...