Kilns, Wheels & Equipment: Page 4
Grid
List
Metal Bowl-Baubles Firing Stand
Deisgned to aid firing small bowls and baubles, simply upturn the piece and balance on the nichrome rod.
150mm tall.
1100degC
They can be fired up to 1250 degC but the vertical rods weaken the higher you fire them so be careful not to overload them. Heavy beads and pendants will cause the rod to bend, be careful not to overload.
The stand will produce black residue upon the first firing,...
£6.48 inc VAT
Metal Plate Firing Star
Easy way to fire plates.
Made out of stainless steel for temperatures up to 1250C (depending on load!) This kind of kiln furniture lasts longer than stilts made out of ceramics.
Each brick is 60 x 30 x 20 mm with 2 Grooves + 1 Hole 4 mm Ø
Each set comprises of two metal firing stars and six bricks.
from £6.00 inc VAT
Metal Three Pointed Stilt
Metal 3 Pointed Stilt
Metal Pointed Stilts perform the same function as disposable stilts but they have sharper metal points which leave smaller marks in the fired glaze. Metal Pointed Stilts can be used many times over.
As a general rule we wouldn't recommend using stilts to fire stoneware items. Due to the higher temperatures involved, there is a greater chance of the pieces fusing or...
from £1.92 inc VAT
Metal Tile Holder Shims
Turns the large and extra large multichoice bead rack into a tile stand.
Contains 4 shims which hold 6" tiles.
Max temperature: 1250°C
Note: The stress on the firing aids depends heavily on the weight of the ceramic being fired, as well as the heating rate and final firing temperature. The stainless steel firing aids exhibit very high scale resistance up to 1250°C. Flat ceramics...
£5.44 inc VAT
Single Point Metal Spur Steel Stilt
Made from 1mm thick high grade steel.
15mm dia x 9 mm heigh
SOLD SINGULARY
Max temperature: 1250°C
£0.88 inc VAT
Single Steel Stilts
In high grade steel. Material thickness 1.5mm - 2mm depends on shank length. Almost scale free. Smooth surface, precision made.
These stilts will produce a black residue upon the first firing, however this is just oxidation. This may transfer to your piece.
Suitable upto 1250°C
from £1.58 inc VAT
Standard Cone Stands
Re-useable 3 Socket Standard Cone Stand Set of 2
How to use guide
£3.10 inc VAT
Steel Tile Stand
Steel firing stands, for either 10cm, 15cm or 20cm ceramic tiles.
Made out of stainless steel for temperatures up to 1250 °C (depending on load!)
10cm Stand holds 8 tiles L = 108mm H = 155mm W = 104mm
15cm Stand holds 8 tiles L = 156mm H = 155mm W = 104mm
20cm Stand holds 8 tiles L = 207mm H = 155mm W = 104mm
from £18.00 inc VAT
Three Pointed Metal Spur Stilt
Size: 18mm x 9 mm
Made from 1mm thick high grade steel sheet.
Max temperature: 1250°C
£0.89 inc VAT
Tile Cranks
Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four uprights as indicated are needed for each set.
Separate legs can be purchased.
...
from £38.22 inc VAT
Xiem Sanding Sticks For Coloured Clay
Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They’re perfect for sanding, shaping, refining, and finishing a variety of surfaces and materials such as woods, plastics, acrylics, alabasters, and ceramics—green wares and bisque wares. Available in a pack of two for fine, medium, or coarse grit.
Size 1.25...
£2.34 inc VAT
Xiem Sanding Sticks For Porcelain
Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They are designed specifically for sanding, shaping, refining, and finishing on porcelain green wares and bisque wares. They also work well with woods, plastics, acrylics, and alabasters. Available in a pack of two for fine, medium, or coarse grit.
Size 1.25 “W x 7”L
Available...
£2.34 inc VAT
Ceramic Buttons
Ceramic buttons used to attach ceramic fibre to the internal dimensions of a kiln.
To attach: place buttons over fibre and thread nichrome wire (high temp) through button fibre and kiln surface.Secure connection by twisting wire on top of cover...careful not to compress fibre as you will lose some insulating quality.
Top firing temperature 1260°C.
from £1.21 inc VAT
Ceramic Fibre Paper
1260degC
100cm x 61cm
Non Bio Soluble
Kiln paper is used to keep glass, metal clay and pottery from sticking to a kiln shelf during firing. It is an easier solution to treating kiln shelves than the alternative, which is a kiln wash.
Kiln wash must be applied in several layers, and must be removed and reapplied when it bubbles or chips. However, kiln paper can be a much more expensive...
from £5.71 inc VAT
Fire Brick 42% Alumina (230mm x 114mm x 76mm)
Fire Brick 42% Alumina (230mm x 114mm x 76mm)
£3.54 inc VAT
High Temperature Insulating Fire Brick J26 (B6)
H.T.I. Type Insulating Fire Brick J26
230mm x 114mm x 76mm
Maximum Operating Temperature 1400 degrees.
JM firericks are made from high purity refractory clays, with graduated additions of alumina for the higher temperature products and a carefully graded organic filler, which burns out during manufacture to give a uniform, controlled pore structure. These bricks give good thermal insulation,...
£5.63 inc VAT
Refractory Glue Adhesive
This high temperature, high silica refractory kiln glue is to be used for the fixing of ceramic blanket/paper to brick or metal or in other areas
where cement is not appropriate.
It can be fully cured with a dry firing of the kiln.
Stable to a top temperature of 1450°C.
Was £8.90 Now £6.00 inc VAT
Refractory Kiln Cement
High temperature kiln cement comes in ready made liquid paste form. General purpose air setting cement use to join bricks, fibre, kiln repairs or fill in cracks.
The cement can be used as a patch repair or indeed as a mortar between bricks.
It can be fully cured with a dry firing of the kiln. Stable to a top temperature of 1450°C.
£3.61 inc VAT
Rigidiser
500ml
An inorganic liquid hardening agent for ceramic fibre blanket and board. It produces a hard surface finish with increased resistance to mechanical abrasion and to gas flow erosion. Hardener can be applied by brushing, spraying or dipping.
Rigidiser will help the walls of the kiln made with blanket fibre from being too flaky.
APPLICATIONS PROCEDURE
Hardener is normally used diluted 50-50...
£5.34 inc VAT
Rohde Controller ST310
Intuitive controller for use in workshops, schools and hobby rooms: ROHDE myKiln App compatible and SolarReady (PV / photovoltaics).
32 programs with 2 segments
Single-zone controller
2 controlled heating ramps, 1 controlled soak period and 1 controlled cooling ramp
Current ROHDE controllers are optimised for operation with a PV system (ST 310 PV)
Soak times up to 99 hours 59 mins
Ramp...
£375.60 inc VAT
Rohde Controller ST411
Clear and powerful control unit with flexible programming for use in ceramics, schools and laboratories. The controller has a switching output (event) for controlling supply or exhaust air flaps. ROHDE myKiln App compatible and SolarReady (PV / photovoltaics).
Single-zone controller
32 programs with up to 32 segments each
1 controlled heating/cooling ramp + soak period per segment
Current...
£447.60 inc VAT
Stafford CC2 (2m Controller Cable Plain Ends)
Stafford CC2 (2m Controller Cable Plain Ends)
£35.51 inc VAT
Stafford CC3 (3m Controller Cable Plain Ends)
Stafford CC2 (3m Controller Cable Plain Ends)
£42.60 inc VAT
Stafford CC3H (3m Controller Cable with Harting Plug)
Stafford CC3H (3m Controller Cable with Harting Plug)
£56.99 inc VAT
Type K Thermocouple
200mm long TYPE K thermocouple. Suitable for Raku and other Low firing processes, up to 1100c. This thermocouple has a heat-resistant metal sheath and is robust, ideal for use in Raku kilns.
It comes with a 2 Meter lead and mini-plug, ready to plug into the pyrometer.
£47.99 inc VAT
Rohde Furniture Set 0
Cordirex 128" batts to 1300C
Inclusive of robust 'multire x 2" hollow stilts
Precise and high quality manufacture
Consists of:
Kiln Shelves - 320mm x2
Props - 25mm x3, 50mm x3, 75mm x3,100mm x3
Weight - 4kg
£104.33 inc VAT