• display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 |

1-4'' Kiln Prop Connector
1-4'' Kiln Prop Connector
1/4" Prop Connector
£2.16 inc VAT
£1.80 ex VAT
Castellated Props
Castellated Props
Castellated Prop

5

from £1.98 inc VAT
£1.65 ex VAT

Heavy Duty Prop BaseHeavy Duty Prop Base
Heavy Duty Prop Base
Heavy Duty Prop Base

5

£8.04 inc VAT
£6.70 ex VAT
Heavy Duty Tubular Props
Heavy Duty Tubular Props
Heavy Duty Tubular Props

5

from £1.80 inc VAT
£1.50 ex VAT

Kiln Prop Extensions
Kiln Prop Extensions
Kiln Prop Extensions

5

from £2.40 inc VAT
£2.00 ex VAT
Light Duty Tubular Props
Light Duty Tubular Props
Light Duty Tubular Props

5

from £1.32 inc VAT
£1.10 ex VAT

10'' x 14'' x 5-8'' Kiln Shelf
10'' x 14'' x 5-8'' Kiln Shelf
10" x 14" x 5/8" Kiln Shelf

5

£24.07 inc VAT
£20.06 ex VAT
11'' x 17'' x 3-4'' Kiln Shelf
11'' x 17'' x 3-4'' Kiln Shelf
11" x 17" x 3/4" Kiln Shelf
£30.31 inc VAT
£25.26 ex VAT

11.5'' x 11.5'' x 5-8'' Square Kiln Shelf
11.5'' x 11.5'' x 5-8'' Square Kiln Shelf
11.5" x 11.5" x 5/8" Kiln Shelf

5

£18.00 inc VAT
£15.00 ex VAT
17'' x 12'' x 1'' Kiln Shelf
17'' x 12'' x 1'' Kiln Shelf
12" x 17" x 1" Kiln Shelf
£37.67 inc VAT
£31.39 ex VAT

17'' x 12'' x 3 /4'' Kiln Shelf
17'' x 12'' x 3 /4'' Kiln Shelf
18" x 12" x 3 /4" Kiln Shelf
£30.19 inc VAT
£25.16 ex VAT
17'' x 14.5'' x 3/4'' Kiln Shelf
17'' x 14.5'' x 3/4'' Kiln Shelf
17" x 14" x 1" Kiln Shelf

5

£53.39 inc VAT
£44.49 ex VAT

17'' x 17'' x 1'' Kiln Shelf
17'' x 17'' x 1'' Kiln Shelf
17" x 17" x 1" Kiln Shelf
£53.39 inc VAT
£44.49 ex VAT
17'' x 20'' x 1'' Kiln Shelf
17'' x 20'' x 1'' Kiln Shelf
17" x 20" x 1" Kiln Shelf
£67.20 inc VAT
£56.00 ex VAT

18'' x 12'' x 5-8'' Kiln Shelf
18'' x 12'' x 5-8'' Kiln Shelf
18" x 12" x 5/8" Kiln Shelf * Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid heating of wet kiln furniture may result in cracking or sudden fragmentation.
£55.20 inc VAT
£46.00 ex VAT
18'' x 21'' x 7-8'' Kiln Shelf
18'' x 21'' x 7-8'' Kiln Shelf
18" x 21" x 7/8" Kiln Shelf
£68.40 inc VAT
£57.00 ex VAT

21" x 10.5'' x 1'' Kiln Shelf
21" x 10.5'' x 1'' Kiln Shelf
21" x 10.5" x 1" Kiln Shelf For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm. * Please note all new batts should be separted and dried slowing over several hours. Do not exceed 110 degrees C until completely dry. Rapid...
£60.00 inc VAT
£50.00 ex VAT
24'' x 24'' x 3-4'' Kiln Shelf
24'' x 24'' x 3-4'' Kiln Shelf
24" x 24" x 3/4" Kiln Shelf
£74.78 inc VAT
£62.32 ex VAT

9.5'' x 12.5'' x 5-8'' Kiln Shelf
9.5'' x 12.5'' x 5-8'' Kiln Shelf
9.5" x 12.5" x 5/8" Kiln Shelf
£24.00 inc VAT
£20.00 ex VAT
Circular Kiln Shelves
Circular Kiln Shelves
Circular Kiln Shelves For kilns. The lifespan of a kiln shelf depends mainly on the distance between the top edge of the item to be fired and the underside of the kiln shelf above. Generally there should be a distance of at least 25mm. * Please note all new batts should be separated and dried slowing over several hours. Do not exceed 1100 degrees C until completely dry. Rapid heating of wet kiln...

5

from £9.60 inc VAT
£8.00 ex VAT

Semi Circular Kiln Shelves
from £7.34 inc VAT
£6.12 ex VAT
Orton Mini Pyrometric ConesOrton Mini Pyrometric Cones
Orton Mini Pyrometric Cones
Small Cones are commonly used in the Kiln-Sitter®. The tapered shape allows some flexibility to adjust shut-off by placing the thinner or thicker portion of the cone under the sensing rod. Small Cones can also be used on the kiln shelf as miniature witness cones when space is limited. Cone Number 60°C 100°C 150°C 018 712 722 732 017 736 748 761 016 769 782 794 015 788 802 816 014 807 822 836 013 837 848 859 012 858 869 880 011 873 883 892 010 903 913 920 09 917 922 928 08 942 948 954 07 973 979 985 06 995 1002 1011 05 1030 1038 1046 04 1060 1065 1070 03 1086 1093 1101 02 1101 1110 1120 01 1117 1127 1137 1 1136 1147 1154 2 1142 1152 1162 3 1152 1160 1168 4 1160 1170 1181 5 1186 1207 1218 6 1220 1230 1241 7 1237 1246 1255 8 1247 1259 1270 9 1260 1270 1280 10 1282 1293 1303 11 1293 1303 1312 12 1296 1306 1326

5

from £0.10 inc VAT
£0.08 ex VAT

Orton Standard Pyrometric ConesOrton Standard Pyrometric Cones
Orton Standard Pyrometric Cones
Pyrometric cones are slender pyramids made from about 100 carefully controlled compositions. Each cone number is unique in measuring temperature within a small temperature range (less than 30°C). Cones measure the amount of heat absorbed. As the cone nears its maturing range, it softens and the tip begins to bend, drawn down by the influence of gravity. Standard cone heating rate °C per...

3

from £4.04 inc VAT
£3.37 ex VAT
3 Point Metal Spur Stilt
3 Point Metal Spur Stilt
3 Point Metal Spur Stilt

5

£0.89 inc VAT
£0.74 ex VAT

3'' Bar Firing Stilt with 7 Points
3'' Bar Firing Stilt with 7 Points
3" Bar Firing Stilt with 10 Points
£4.50 inc VAT
£3.75 ex VAT
4'' Tile Crank Set
4'' Tile Crank Set
4" Tile Setter Crank Double Tile crank for 4" tiles Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four uprights as indicated...
from £38.22 inc VAT
£31.85 ex VAT

6'' Tile Crank Set
6'' Tile Crank Set
6" Tile Setter Crank For 6" square tiles Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four uprights as indicated are...

5

from £38.22 inc VAT
£31.85 ex VAT
8'' Tile Crank Set
8'' Tile Crank Set
8" Tile Setter Crank Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four uprights as indicated are needed for each set. The...
from £38.22 inc VAT
£31.85 ex VAT

Bead Firing Rack
SMALL BFR1 100mmL X 90mmH X 60mmW MEDIUM BFR2 100mmL X 100mmH X 80mmW LARGE BFR3 160mmL X 110mmH X 60mmW EXTRA LARGE BFR4 160mmL X 135mmH X 80mmW They can be fired up to 1260 degC but the bars weaken the higher you fire them so be careful not to overload them. Spread beads evenly along the bar especially the thinner 2mm ones. The rack will produce black residue upon the first firing,...

3

£20.30 from £15.00 inc VAT
£12.50 ex VAT
Budget Raku Tongs Straight   Ref.RAKT-B2
Budget Raku Tongs Straight Ref.RAKT-B2
Budget Raku Tongs Straight
£29.99 inc VAT
£24.99 ex VAT

Budget Raku Tongs With Teeth   Ref.RAKT-1
Budget Raku Tongs With Teeth Ref.RAKT-1
Budget Raku Tongs With Teeth

5

£27.25 inc VAT
£22.71 ex VAT
Carborundum Abrasive StickCarborundum Abrasive Stick
Carborundum Abrasive Stick
Small Abrasive Block
from £8.68 inc VAT
£7.23 ex VAT

Ceramic StiltsCeramic Stilts
Ceramic Stilts
Moulded stilts are a popular method of supporting glaze ceramic ware clear of the kiln shelf. Each stilt has three arms, each terminating in an upward and downward point, thus providing minimum contact area. These Double Pointed stilts are ideal for increasing air flow during your firings, to ensure that all parts of your pot are evenly heated. These stilts are high alumina stilts, and can be...
from £0.49 inc VAT
£0.41 ex VAT
Fire Brick 3 Holes 60mm X 60mm X 15mm
Fire Brick 3 Holes 60mm X 60mm X 15mm
Fire Brick 3 Holes 60mm X 60mm X 15mm
£5.47 inc VAT
£4.56 ex VAT

Fire Brick 5 Holes 170mm X 25mm X 15mm
Fire Brick 5 Holes 170mm X 25mm X 15mm
Fire Brick 5 Holes 170mm X 25mm X 15mm
£7.31 inc VAT
£6.09 ex VAT
Firing Rod 2mm Thick
Firing Rod 2mm Thick
Firing Rod 2mm

5

from £0.54 inc VAT
£0.45 ex VAT

Firing Rod 3mm Thick
Firing Rod 3mm Thick
Firing Rod 3mm

2

from £0.98 inc VAT
£0.82 ex VAT
Firing Rod 4mm Thick
Firing Rod 4mm Thick
4mm diameter. For temperatures upto 1250 °C (depending on load!) Used to support beads, rings and other small articles during kiln firing. The Bars are designed with a special, high temperature alloy that retains strength in the extreme heat required for ceramic firing. The rods may bend and will blacken in the kiln but this is completely normal. Please note the rods get weaker the higher...

3

from £1.50 inc VAT
£1.25 ex VAT

Firing Rod 5mm Thick
Firing Rod 5mm Thick
5mm diameter. For temperatures upto 1250 °C (depending on load!) Used to support beads, rings and other small articles during kiln firing. The Bars are designed with a special, high temperature alloy that retains strength in the extreme heat required for ceramic firing. The rods may bend and will blacken in the kiln but this is completely normal. Please note the rods get weaker the higher...
from £1.92 inc VAT
£1.60 ex VAT
Galvanized Metal Smoke Mini Bin
Galvanized Metal Smoke Mini Bin
Metal mini bin, used for smoke firing. Simply load with combustibles and plunge in your hot raku fired pots and let them smoulder. 28cm Diameter 35cm Heigh Comes with a free bag of wood chippings, while stocks last!
£18.99 inc VAT
£15.83 ex VAT

Green Welders Goggles Ref.GOGG
£12.07 inc VAT
£10.06 ex VAT
Hexagonal Bed Of Nails 92 Pins Ref. BEDO
Hexagonal Bed Of Nails 92 Pins Ref. BEDO
Hexagonal Bed Of Nails 92 Pins Ref. BEDO

5

£15.46 inc VAT
£12.88 ex VAT

High Fire Three Stilt Firing Stand 60mm
High Fire Three Stilt Firing Stand 60mm
High Fire 3 Stilt Firing Stand
from £6.00 inc VAT
£5.00 ex VAT
Individual Tile Setter Base/Top
Individual Tile Setter Base/Top
Tile cranks have two components - the uprights and the base/cover. The tile size determines which base/cover is required and the height of the stacking area and thickness of the tile determine the upright size. The uprights slot into a base/cover at either end, producing a frame into which the tiles are place ready for firing. Ledges protrude from the uprights support the tiles. Use our two part tile...
from £7.00 inc VAT
£5.83 ex VAT

Individual Tile Setter Legs
Individual Tile Setter Legs
Tile cranks have two components - the uprights and the base/cover. The tile size determines which base/cover is required and the height of the stacking area and thickness of the tile determine the upright size. The uprights slot into a base/cover at either end, producing a frame into which the tiles are place ready for firing. Ledges protrude from the uprights support the tiles. Use our two part tile...
from £6.36 inc VAT
£5.30 ex VAT
Kemper Element Staples Pack Of 12
Kemper Element Staples Pack Of 12
Kemper Element Staples Pack Of 12
£8.34 inc VAT
£6.95 ex VAT

Kevlar Knitted Heat Resistant Glove
£37.08 inc VAT
£30.90 ex VAT
Leather Lined Gauntlet
Leather Lined Gauntlet
A pair of great quality heavy duty gauntlets. Leather construction, 14inch long. Lined for comfort. NOT RECOMMENDED FOR RAKU FIRINGS as they don't provide required heat protection. Ideal for personal hand protection when taking warm items out of the kiln.
£9.59 inc VAT
£7.99 ex VAT
Page: 1 | 2 | 3 | 4 |