Building & Repair
Grid
List
Ceramic Buttons
Ceramic Buttons used to attach ceramic fibre to the internal dimensions of a kiln.
To attach: place buttons over fibre and thread nichrome wire (high temp) through button fibre and kiln surface.†Secure connection by twisting wire on top of cover...careful not to compress fibre as you will lose some insulating quality. Top Firing temperature 1260 degrees celsius
from £1.21 inc VAT
Ceramic Fibre Paper
1260degC
100cm x 61cm
Non Bio Soluble
Kiln paper is used to keep glass, metal clay and pottery from sticking to a kiln shelf during firing. It is an easier solution to treating kiln shelves than the alternative, which is a kiln wash.
Kiln wash must be applied in several layers, and must be removed and reapplied when it bubbles or chips. However, kiln paper can be a much more expensive...
from £5.71 inc VAT
Fire Brick 42% Alumina (230mm x 114mm x 76mm)
Fire Brick 42% Alumina (230mm x 114mm x 76mm)
£3.54 inc VAT
High Temperature Insulating Fire Brick J26 (B6)
H.T.I. Type Insulating Fire Brick J26
230mm x 114mm x 76mm
Maximum Operating Temperature 1400 degrees.
JM firericks are made from high purity refractory clays, with graduated additions of alumina for the higher temperature products and a carefully graded organic filler, which burns out during manufacture to give a uniform, controlled pore structure. These bricks give good thermal insulation,...
£5.63 inc VAT
Refractory Glue Adhesive
Used as an adhesive to stick ceramic fibre/paper to high temp bricks and metals.
£8.90 inc VAT
Refractory Kiln Cement
High temperature kiln cement comes in ready made liquid paste form. General purpose air setting cement use to join bricks, fibre, kiln repairs or fill in cracks.
£3.61 inc VAT
Rigidiser
500ml
An inorganic liquid hardening agent for ceramic fibre blanket and board. It produces a hard surface finish with increased resistance to mechanical abrasion and to gas flow erosion. Hardener can be applied by brushing, spraying or dipping.
Rigidiser will help the walls of the kiln made with blanket fibre from being too flaky.
APPLICATIONS PROCEDURE
Hardener is normally used diluted 50-50...
£5.34 inc VAT
