Crackle Transparent Earthenware Glaze BOTZ/9351
Transparent, glossy crackle glaze, must be applied in thin layers† since it tends to run strongly.Apply only a thin layer of the latter, i.e., without dilution or 1 – 2 times slightly diluted.† To prevent blister formation, biscuit fire at 1000 ∞C
Colour cracks with ink or strong tea or coffee after cooling.
For a large crazing apply tea at an early stage, for a finer crackle, wait up to a week.
If crackles did not develop, the glaze can also be removed from the kiln at approx. 100 ∞C and quenched with cold water.
Ready mixed in brush-on form. Distincive and colourful effects which vary with thickness and the surface to which they are applied. These glazes meet all COSHH and CHIP safety regulations. Leadless but also zinc cadmium and antimony free and so are especially safe for use in schools.
Tends to run strongly.
Darker on red or black clay.
NOT RECOMMENDED FOR TABLEWARE
SOLD IN 200ml POTS
|PDF Attachment||CoSHH Health & Safety|