Description
Health & Safety & Disposal

Description

Silica sand can be used for in various ways in ceramics. It can be used to protect kiln shelves by spreading a fine layer under your ware to catched glaze drips. It can also be added to glazes as the 'silica' content, however this is less common. Can be added to a clay body, they help glaze fit and make the body more refractory.

16-30 Mesh

View other products in Raw Materials »

Health & Safety & Disposal

When handling powdered ceramic materials, you must wear an FFP3/P2 face mask and nitrile gloves to prevent inhalation and skin contact.
Wear a wipeable apron, polyester overalls, or similar. Clean or wash frequently.
Always clean your studio with a wet sponge rather than sweeping to stop dust from becoming airborne.
When preparing glazes, add the dry material to water, not vice-versa, to minimise dust formation.
Do not allow eating and drinking in the studio and thoroughly wash hands when leaving.
Never eat, drink, or apply cosmetics in areas where clay or glazes are handled.
Ensure emergency eye-washing facilities are available in the room.
Review official guidelines regarding studio ventilation and chemical management routinely.

Silica sand is not classified as hazardous for supply or transport in its natural, damp bulk form. However, when processed, dried, or handled in a way that generates respirable crystalline silica (RCS) dust, it becomes a severe occupational and health hazard linked to diseases like silicosis and lung cancer.

Dispose of as normal industrial waste, in accordance with local/regional/national/international regulations.