Aventurin Earthenware Glaze BOTZ/9224

As low as £8.46 £7.05
In stock
SKU
BOTZ/9224_pid-401
Aventurin Earthenware Glaze Ref. BOTZ/9224

Reddish-brown glaze with glitter effects. very interesting on dark clay. Ideal for combinations (e.g. with 9569 Sternenhimmel) For best results apply into thin coats.

Ready mixed in brush-on form. Distincive and colourful effects which vary with thickness and the surface to which they are applied. These glazes meet all COSHH and CHIP safety regulations. Leadless but also zinc cadmium and antimony free and so are especially safe for use in schools.

FIRING RANGE 1020degC-1060degC

Glossy

Tends to run strongly

Crazing possible

Not recommended for tableware

COMES IN 200ml POTS

More Information
Brand Botz
Spec
""

""

""
""
""

BOTZ Fl゚ssigglasur, brush-on glazes for the glazing range 1020 –1060 C.

BOTZ brush-on glazes are available in 200 ml and 800 ml jars, ready to use. They are highly concentrated. 800 ml equals 1.4 to 1.8 kg mixed powder glaze.

Stir the glaze thoroughly and apply the first coat on clean, dust-free biscuit ware with a brush (e.g. BOTZ 9005) before processing. Every glaze is finely tuned and has its individual consistency.

Apply a second coat when the first is dry. Depending on the thickness you might want to apply a third coat.

The glaze can soon be touched and you can then move your glazed piece of pottery to the kiln. For best results however, allow the glaze to dry for a day.

The ideal firing temperature for nearly all BOTZ brush-on glazes is about 1050 C. If they are then soaked for 10–20 minutes the glazes become smoother and many effects come out more markedly.

For the special features of each individual glaze click the “i n f o” button under the corresponding colour sample.

Safety data sheets are available on demand: info[at]botz-glasuren.de

BOTZ Fl゚ssigglasur, brush-on glazes for the glazing range 1020 –1060 C.

BOTZ brush-on glazes are available in 200 ml and 800 ml jars, ready to use. They are highly concentrated. 800 ml equals 1.4 to 1.8 kg mixed powder glaze.

Stir the glaze thoroughly and apply the first coat on clean, dust-free biscuit ware with a brush (e.g. BOTZ 9005) before processing. Every glaze is finely tuned and has its individual consistency.

Apply a second coat when the first is dry. Depending on the thickness you might want to apply a third coat.

The glaze can soon be touched and you can then move your glazed piece of pottery to the kiln. For best results however, allow the glaze to dry for a day.

The ideal firing temperature for nearly all BOTZ brush-on glazes is about 1050 C. If they are then soaked for 10–20 minutes the glazes become smoother and many effects come out more markedly.

For the special features of each individual glaze click the “i n f o” button under the corresponding colour sample.

Safety data sheets are available on demand: info[at]botz-glasuren.de

Save

PDF Attachment CoSHH Health & Safety
Write Your Own Review
You're reviewing:Aventurin Earthenware Glaze BOTZ/9224
Your Rating
  • VISA Logo
  • PayPal Logo
  • Mastercard Logo
  • Liquidshop Logo
Copyright © 2018 Bath Potters' Supplies Company Number 5457530 VAT Number 862366411