Bow Harps & Bevel Tools
Grid
List
Adjustable Bow Harp
Four wire in a set, replace when needs changed. (Spring-250mm, straight wire-380, 457, 535mm)
Adjustable harp cutter. For 3 length. (Length-425mm, height-160mm)
Spring shape will change to adapt the length, so you can get three patterns from one spring.
Move by wheels, easy to move.
Stainless, firm and durable material
£26.00 inc VAT
Bow Harp
Bow Harp Mini 10cm One piece construction.
Bow Harp Small 30cm (1cm increments) spare wires available.
Bow Harp Large 50cm (1cm increments) spare wires available.
Harp use to slice through clay, easily create flat slabs of clay. Gently pull towards you with two hands to slide it through your clay.
The wire can be adjusted from 7mm to a maximum height of 105mm along the wire notches every...
from £12.00 inc VAT
Hand Held Bow Harp
Harp clay cutter is made from PETG and comes with 1 stainless steel string attached.
Dimensions: 80 x 100 x 20 mm
The harp cutter is meant only for cutting clay!
£19.20 inc VAT
Large Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs.
Available in either wood or perspex.
from £8.65 inc VAT
Metal Umakaki Bow
This umakaki trimming harp tool is used to level flat, wide surfaces such as the bottom of a shallow dish or plate. It is best for removing large amounts of clay. To sharpen them, simply use a wet sandstone, apply medium to light pressure as you're drawing the edge across the stone. Apply a little pressure or a bit more, depending on how sharp you want the tool to be.
£4.03 inc VAT
Mudtool Bow Harp Spare Wires Straight
Spare wires for the Mudtool Mudcutter and Carving Bows.
Set Of Three
£13.38 inc VAT
Mudtools Bow Harp
The Mudcutter may be the most useful tool that you didn’t know you needed. It’s a wire tool with a ridged bowed frame. This allows you to cut one handed. You can single handedly cut clay from a pug mill or extruder or cut just the right angle on spout before attaching it to the pot. It’s like an extra hand!
The Carving Bow is the little brother of the Mudcutter. It’s well...
£40.00 inc VAT
Small Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs. Cuts different angles depending on how you hold the tool – hold flat for 2 angles and hold on its side for different cutting angles.
10cm long x 4.5cm tall.
£8.04 inc VAT
Small Clay Cutting Bow 75mm
This new facet tool is made of tough spring steel and features a fine stainless wire, ideal for cutting facets into pottery. Easily held with one hand. The Yumi is used for trimming uneven rims or creating flat sides on round objects. It is made of steel with rustproof coating.
£2.74 inc VAT
Spare Bow Harp Wire
Spare bow harp wire for the 30cm and 50cm metal bow harps.
Changing/adjusting the wire can be tricky. We recommend pressing down on one side of the harp on a solid surface to create enough bend, to be able to slide the new wire on.
£2.06 inc VAT
Xiem X-Bevel Cutter
X-Bevel is a clay tool that is designed for a quick and precise cutting of clay at 45, 30 and 60-degree angles. It is a must-have hand-building tool for all potters.
£10.97 inc VAT