Kilncare IKON V61X Kiln
Available Product Description
IKON Range Features
Ultra-efficient with an average 1280c stoneware firing using only 18 units of electricity.
1315c maximum temperature.
Triple section lid seal including anti draught rope seal, brick to brick and lid insert.
Three layer chamber insulation including GX Micropore “super” insulation.
Double layer floor insulation with full stainless steel under plate.
Lower inlet port with shutter raised from the kiln floor to avoid debris blockage.
Upper exhaust port with shaped chimney and multi position shutter.
Lid and chamber made from 100% 304 brushed stainless steel.
Strong skeleton sub frame to absorb lid lifting and closing pressure.
Twin gas spring lid assist. One on either side to make lifting and closing an easy operation and avoid lid twist.
Twin lid clamps. One of either side to keep even lid pressure when closed, with padlock locking facility.
Kanthal A1 elements.
Element connections housed separately from power components to ensure cool running.
Low rear mounted and heavily ventilated power component box to keep the major components cool and away from residual heat generated by the chamber during firing.
Solid State Relay control switching for maximum reliability due to no moving parts and also near silent operation.
Dual contactor over fire protection circuit
Dual channel lid safety cut off switch
Dual contactor lid cut off circuit.
KCR32C 32 program, 32 segment controller.
KCR32C can be hand held to avoid kneeling by the kiln to set and program.
Keypad lock, power used, over fire protection, program pause, segment advance and 4 day delay are all features of the KCR32C.
Optional KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
Twin rear solid castors.
Twin front swivel and lockable castors.
36 month guarantee on all parts excluding the elements.
Built and designed by Kilcare in the U.K.
Max Temp °C - 1315°C
Capacity (l) - 61L
Int Dimensions (mm) - ø416mm x 445mm (h)
Ext Dimensions (mm) - W-725mm x D-750mm x H-890mm
Output - 5 kW
Current - 21A
Weight - 105kg
The optional kiln furniture set:
2 x shelves of 368mm
3 x props of 25mm
3 x props of 50mm
3 x props of 75mm
3 x props of 100mm.
- Delivery times subject to availability
- Delivery is to your driveway only and does not include installation. Please consider that you may need help to situate the kiln.
- Delivered directly from the supplier. If you order other items at the same time as your kiln, they will arrive separately.
- Delivery is an all day delivery, please contact us if you need a timed delivery window as there may be a charge.
Our Palletised Delivery Guidance shows you what to expect upon delivery.
On arrival see how your Ikon Toploader is packed.
Guarantee
- 36 month guarantee on all parts excluding the elements.
Standard KCR32C Controller
32 programs - each with up to 32 segments.
Each segment is a controlled heating/cooling ramp soak.
Suitable for glass or ceramics use.
Soak times up to nearly 100 hours.
Ramp rates from 1 to 999°C/hour full.
Program Pause & Segment Advance facilities.
Keyboard lockable.
Delayed start facility - up to 4 days.
Power failure recovery.
Energy used display.
Event / Damper / Fan relay output.
Alarm relay with alarm buzzer.
Mains power switch.
Built in the United Kingdom.
The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It has a huge
32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed
by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 1c per hour if required.
KCR32CWIFI Controller (Optional)
The KCR32CWIFi is internally the same as the KCR32C but has the capability to be accessed and controlled remotely from your mobile device.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
People who bought this also bought...
More from this collection...
Share
Kilncare IKON V61X Kiln
Facebook Twitter Email Pinterest Telegram