Crystal Clear Crackle Raku Brush On Glaze BP7R

As low as £4.02 £3.35
In stock
SKU
BP7R_pid-6378
Bath Potters BPS Fine White Crackle Raku Brush On Glaze BP7R

Fired up to 1000degC, cool to 750degC, remove from kiln. Put ion combustable such as sawdust. Allow to cool. Wash in water to encourage crazing.

More Information
Brand BPS
Spec

Raku glazes should be fired up to 1000C in either an electric or gas kiln. They they should be allowed to cool in the kiln to 750C. While still red hot they should be transferred as quickly as possible into a reduction bin (typically a metal garbage can or small metal container with a lid that has been lined with organic material such as newspaper and/or sawdust, etc.)

As soon as the pieces are in the bin the lid should be put on to keep oxygen from entering the container, in order to develop the reduction atmosphere. The pieces should be allowed to cool in the bin for at least 20 minutes.

When the red hot pieces go into the bin, the organic material ignites producing flames and smoke so this part of the firing should be done outside.

Firing tips:

Try to size the reduction bin to the size of the piece being fired.

Position the organic material and the piece so that the flames can get all around the piece.

Different organic materials can produce very different results, so for example a glaze reduced in newspaper could be a beautiful blue color and the same glaze reduced in sawdust could have a metallic copper appearance.

Pieces should be cleaned immediately with water and a hard bristle brush.

After cleaning, warm the pieces in the kiln to evaporate any water from the piece. This helps to set the colors more permanently.

Write Your Own Review
You're reviewing:Crystal Clear Crackle Raku Brush On Glaze BP7R
Your Rating
  • VISA Logo
  • PayPal Logo
  • Mastercard Logo
  • Liquidshop Logo
Copyright © 2020 Bath Potters' Supplies Company Number 5457530 VAT Number 862366411