Stafford ST215 10 Programme Controller
• 10 programs
• Up to 16 segments per program
• 1 controlled heating / cooling ramp + 1 soak per segment
• Ideal for glass or ceramics use
• Soak times up to 99hr 59min
• Ramp rates from 1 to 999∞/hour + FULL
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 99hr 59min
• Power failure recovery
• Energy used display
• Worldwide operation
• ∞C/∞F switchable display
• Standard alarm / safety relay with alarm buzzer FEATURES
The ST215 is a small easy to use ergonomically designed controller in a hand-held case with rubber hand grips.† It is supplied with a wall mounting holster bracket and a flexible lead and plug as standard.† Bright orange LED displays are fitted.† The ST215 is designed to control single zone electric kilns and is derived from†the long established ST315 controller.
It is suitable for worldwide use with a universal power supply and selectable ∞C/∞F operation.
For a traditional pottery firing controller please see our ST216 (separate datasheet).† This is in the same product range as the ST215 controller and has 80 programs.
The ST215 is a 10-program controller designed for glass, ceramics & pottery use.† Each program can have up to 16 segments. It is fully adjustable with a detailed 4-lamp mimic display & continuous display of segment number.† Each segment comprises of a ramp followed by a soak.† Ramps can be heating or cooling.† It executes a controlled ramp to the soak temperature where it dwells for the required period then executes the next segment.† The end of the program is marked by selecting ‘End’ while entering a ramp rate.† Natural cooling then follows. Press the† key to display the program number – this can be changed if required with the† &† keys. To change any of the controller’s settings press the† key (or reverse with the† key) until the required lamp on the mimic display flashes.† The current value will be displayed together with a temperature, ramp rate or time icon.† Change the displayed settings with the† &† keys which can be held down for acceleration.† All settings are remembered while the controller is powered off.† The keyboard can be locked to prevent tampering.
The n key is used to commence a firing.† An optional start delay can be entered.† The progress of the firing is shown on the mimic display.† If a start delay has been set then the delay time remaining will be displayed.† During firing the program settings can be reviewed and altered if required and the program can be paused/resumed or advanced to the next segment.† The current set-point and the current energy used can be viewed by pressing the† key at any time.† During soaking the soak time remaining and the soak temperature are alternately displayed.† In the event of a power failure the controller will intelligently re-commence firing when power returns.
Control Accuracy P.I.D. Control (adjustable) Reading accuracy: ±0.25% FSD ±1 digit
Thermocouple R,S,K & N type (selectable)
Cold Junction Compensation Yes - precision thermistor type
10 programs each with 1-16 segments 1 ramp & 1 soak per segment ramp rate: 1 to 999∞/hour or FULL Ramps can be heating or cooling Programs
Operating temperature range: -10∞C to +55∞C Storage temperature range:† -10∞C to +55∞C Environmental
Material: ABS flame retardant UL 94V-0 Sealing: IP50 Size: 80/68mm(W), 165mm(L), 28mm(D) Colour: Black/Dark Grey†† RAL9011/RAL7012 Enclosure
Error Handling Thermocouple failure detection Thermocouple reversal detection Heater failure detection Kiln over-temperature detection Room over-temperature detection Lock-up on error facility Audible Alarm (buzzer)
Keyboard lock facility + indicator Program running & kiln heating-on indicators Energy used display Program pause & segment advance features Other
The ST215 can be configured to the kiln using a configuration menu.† The thermocouple type and kiln power rating (for the energy used function) can be configured together with ∞C/∞F operation.† Other installer-configurable items include power failure recovery enable/disable, error message handling and control parameters.
The ST215 is supplied with a moulded ABS holster style wall mounting bracket and a flexible lead & plug.
Power supply Line voltage range: 90 - 264VAC Frequency: 50/60Hz
Power:† Controller 4VA (max)††††††††††††† Switched outputs: 125VA
Fuse:††† 3.15A slow-blow HRC† 20mm x 5mm ceramic
|PDF Attachment||information sheet|