JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Account

Kaowool Rigidiser

Be the first to review this product

As low as £5.08 £4.23

In stock

SKU

RIGI_pid-3643

Kaowool Rigidiser

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Kaowool Rigidiser / Hardener

An inorganic liquid hardening agent for ceramic fibre blanket and board.† It produces a hard surface finish with increased resistance to mechanical abrasion and to gas flow erosion.† Hardener can be applied by brushing, spraying or dipping.†

Rigidiser will help the walls of the kiln made with blanket fibre from being too flaky.

More Information

More Information
Spec	APPLICATIONS PROCEDURE Hardener is normally used diluted 50-50 with water and can be applied by brushing, spraying, or dipping. Spray operation should be carried out under well ventilated conditions, taking care to avoid breathing in the spray. The amount needed varies with the type of application, and is dependent on variables such as Blanket density and the depth of treatment required. As a surface coating, 2.5 litres of diluted Hardener will cover 1m2, and 17 litres will saturate the same area of 25mm @ 128kg/m3 Blanket. Drying procedure is not critical but 12 hours at 90 C is fairly typical. Natural drying is feasible but, in the case of through-hardened Blanket or Board, migration of Hardener to the material surface may occur.
PDF Attachment	health and safety data sheet

Reviews